Monday, 24 July 2017

Mini Greenhouse - by Claudia

Hi and welcome to a really quick and easy little project today!
I would like to show you how to build your own mini greenhouse from Calico Craft Parts' beautiful Window and Iron & Wood Fence Panel Shapes.




I especially fell in love with the beautiful Gothic style window Helen included as a little extra with one of my DT orders (thank you so much, Helen. Mwah! XXX).


Window MDF Wood Shape - Style 3

It pretty sure it is a fantastic piece to include with scrapbooking or art journaling - but as I am no scrapbooker at all (and don't do a lot of art journaling either), I had it sit on my table for quite a while until I suddenly knew what I wanted to use this beauty for. I just knew that I LOVED it and HAD to use it in some way! The perfect idea finally hit me right out of the blue (as is often the case. I use to have alterable and other craft pieces sitting on my desk so I can look at them until inspiration strikes - - and most of the time it strikes when I am NOT trying hard to come up with something truly inspired....lol).

So I ordered an additional Style 3 Window (the largest size) and also four Decorative Post Fence Panels (the small sized ones) to build my greenhouse with.


I had left overs of an old roll of transparent "mobile foil" (mobile not as in "mobile phone".... you know...balancing bits and pieces hanged on bars that hang on other bars with balancing bits and pieces...) that were perfect for covering the greenhouse with. I simply measured along the window's edge from top to bottom and multiplied that by two to get the length of the foil strip I needed. 


The width of my greenhouse equalled the width of two post fence panels. All I had to do is cut out my rectangle piece of mobile foil and fold it in half (which would form the roof ridge). I used a bone folder to get an exact folded edge. 

Using my fingertip I covered both sides of all my wood shapes with DecoArt Black Shimmer Metallic Lustre. 


For a bit of a corroded look I added tiny black spreckles of Carbon Black DecoArt media Mister by pressing down my Mister's nozzle only halfway (which creates tiny spreckles instead of an even mist).  


I just love how the Metallic Lustres create the impression of real metal! 



To glue the fence panels to the foil I used (very little) DecoArt media Liquid Glass, so the backs of the fence panels and windows would still be visible from the other side (through the glued on foil).


I used heavy books to keep everything flat and in place while the Liquid Glass dried and waited until one side of my greenhouse had dried before I continued with the other. Both window shapes were glued in place at the same time and held in place with heavy books and dictionaries. 



 Et voilá!
Quick and easy, right? 




I hope you like it! 

Hugs and happy crafting!
Claudia
xxx










Thursday, 20 July 2017

Teacher Thank You Gift.

Hey people. A quick post from me this week.

End of term is looming and its a crazy time in my house......so many things going on!
Twin number one decided that she wanted to make her teacher a gift to say thank you for a great year. This got left to the last minute (and got left to me!) So.......i incorporated The making of a gift with my Calico make.......and this is what i rustled up!


This is the larger style of the MDF trug kits......wouldn't fit many sweeties in the smaller one!


I started by priming all pieces and both sides with gesso......and then literally just doodled with paint on the four sides and handle!


I wasn't quite happy with my random doodling......so i heat dried them.......and carried on doodling on top!


All the doodling was done with acrylic paint. I then used a watercolour to fill in any white spaces.


I then used a black fountain pen to add a few dots and circles.


The entire piece was then covered in a glaze to stop the water colour from running should it come into contact with water.

Now, all i have to do.....is stop Iris from eating all the sweets before handing over her little thank you gift!

Thanks for reading.
L.xx

Ingredients used
Plain MDF Trug Kit in large

Monday, 17 July 2017

An Owl Princess - altered anchovy tin by Julie Ann

Hello, it's my Monday at Calico Craft Parts Blog, my favourite place to be! Today I have another little anchovy tin shrine to share.



An old friend and I have been researching fairy stories together, exploring recurrent themes and situations and then coming up with our own tales. I'm fascinated by stories of metamorphosis that often seem to express how we long to emulate animals with their gifts of flight, speed and agility. I love to create hybrid creatures in my art work and for this project I created a human princess, imprisoned by her evil magician uncle. By night she escapes through her casement window to become wise queen of the owls, counselling the creatures, free to glide above the trees in the moonlight.



The craft project provided me with plenty of ideas for my story! Here is my anchovy tin, painted and lined with some card with stencilling in clear 3D Gel Medium. Behind it you can see the branches of one of the beautiful,large Calico skeleton tree MDF shapes. I just loved the effect of those branches stretching out and I knew I wanted this as my basis. I painted the tree in different shades of green acrylic and melted gold UTEE on the tips of the branches to symbolise the moonlight.



Next it was the fun part, gathering Calico art parts that would help me tell my story. I am completely in love with these little grey-board hearts. They are so adaptable. At first I had intended to use the blue, stamped heart as a skirt until I changed direction and decided to really emphasise the Princess's owl wings.



Here are the wings, some of her owl attendants and the rambling roses from around her bower.




Bead Gel either side of the tin helped create a textured background. These tiny keys have been threaded through with fine copper wire and - with some gilding - they have the look of real metal keys. I used layers of paint, sanding and dry brushing with a translucent brown acrylic to age my tin. I touched the owls' wings with gilding to suggest the moonlight on their feathers.



The rose patterned heart became the Princess's coat of arms in the finished project. Fragrant roses climb about the walls of the tower where she is imprisoned and grow through the lock on her door.



My story is still a work in progress, but I have fixed a hook on my anchovy tin shrine and have it on the wall close to my desk to inspire me as I write my fairy tale. Thank you so much for stopping by today. I hope you're enjoying your summer. I will be returning in a fortnight's time with a new project to share with you. Until then I wish you happy and creative days!
Calico Craft Parts used in this project
Skeleton Tree MDF Wood Shape Style 10, Large
Thorned Rose Scroll, Flora and Fauna Flourish Style 24
Sheet of  mini MDF wooden keys and escutcheons
Sheet of mini MDF wood wings style 3
Hearts mini Greyboard Shapes
Sheet of mini MDF wood owl shapes
Flying Barn Owl Wood Shape style 3

Thursday, 13 July 2017

Sweet Art Doll by Jennie

Hello everyone and welcome to a fun little project today!


I had so much fun making my glamorous (Gibson) art doll that I thought I would try a smaller one to keep her company.  I have tried some slightly different techniques this time but I must say she is a bit contrary in terms of getting her photo taken! 


I wanted to use some old book paper for her body and it was very easy to draw around the shapes in the board once the body had been popped out for painting.


As she is one of the smaller dolls I used chalk paints to paint the rest of her body as I felt crackle might be a bit overpowering.


Her skirt is made up of three leaf stamps which I have stamped on linen and then layered over some netting.  A piece of narrow ribbon and then the flower hides all the glued edges!


Unlike some of the team here I am absolutely no good at drawing and painting faces so I went through just about ALL my stamp collection to find a head that fitted! It was a lovely exercise and I actually discovered stamps I had completely forgotten all about.  This was one of my very first stamps purchased about eight years ago. 


I think she will make a good companion for my Gibson girl even though they couldn't sit alongside each other for a photograph !

As always thank you for joining me.

Happy crafting!

Jennie x

Live The Dream

Calico Craft parts Used:


Monday, 10 July 2017

Sun, Sea & Sand - by Claudia


Servus, hi and welcome, dear Calico Craft Parts friends! I hope you are enjoying your summer holidays as much as I do!

I love the vintage "bathing beauties" in their gorgeous dresses and when I found this lovely image in the internet, I knew it had to go with one of Calico Craft Parts' lovely "House Kits" and at least one of Helen's awesome and brand new "Word Elements"!

Calico Craft Parts used: 

- Plain MDF House/Shrine Kit - Tall (the "small" size)
- Word Elements - Summer & Seaside
- To the Beach Signpost Wood Shape
- Sheet of Mini MDF Nautical Motifs - Style 1
- Sheet of Mini MDF Nautical Motifs - Style 6

I sealed the completely dried printed out image of my bathing beauty with a thin coat of DecoArt media Ultra Matte Varnish to prevent the printer's ink from bleeding and smudging when tinting the black and white image with a thin wash of DecoArt media Transparent Red Iron Oxide fluid acrylic.
Once that was done and dry I carefully cut out my beauty (using a precision knife).


I used white DecoArt heavy body Acrylic Gesso and dry brushed that onto all the parts I wanted to use. As I have only a little Gesso left in the jar, it is already quite dry and creamy...so it created a wonderfully textured and smudged effect - simply by painting it on with an old and worn bristle brush. I also used the effect of the MDF bleeding through a little when being painted with only one layer of white Gesso - that added a lot to the worn vintage look I was aiming for! 


I painted the stripes (freehand) using diluted DecoArt media Burnt Umber fluid acrylic and a flat soft brush.


Once all was dry, I stacked several sticky foam pads to glue my beauty in place. 
Then I went in with a soft brush and a wash of Transparent Red Iron Oxide here and there for more interest.




Once everything had dried all the pieces were glued together and in place using matte Decou-Page. 

I even used the left over from the house kit's front opening as the base for my little beauty in her beach hut:

Done!

Thank you so much for stopping by today! Enjoy a happy time with loads of "Sun, Sea & Sand" (or whatever else makes you happy)!!!

Hugs and happy crafting!
Claudia
xxx



Thursday, 6 July 2017

Mixed Media Board by Lesley

Hey peeps. Lesley here with a mixed media board for you.

So loving the new "Word Elements"..........and i knew i had to create a piece where i could incorporate one. This is what i made........


I started by priming a 9"x12" board with gesso.

Next i took some water reactive paint in various shades of brown, and added them to the board adding some water as i went. Once i was happy with the coverage, i heat dried it.


I used some green paint a stencil for the lines down the centre of the board.


I then applied a few rub-ons to some areas.


I stamped onto some tissue paper and glued it down with some matt medium.


Next i added a torn strip of handmade paper.

Then, it was onto adding my craft parts. I used the frame of an arched ATC for my girls to sit on.
And the word elements sat on top. I added a little charm.


Underneath, i added a rose with leafy vines, and added a touch of gold wax to finish.


Thanks for reading.
L.xx

Ingredients used
Rose with leafy vines
Arched ATC
Word Elements, travel and explorer